MFT/3
Multifunction table
Video
360°
Illustrations are exemplary. Please note the variant and scope of delivery.
LP-KA65 MFT/3
Perforated top
for KA 65
Product details
Functions
Cut-outs to perfection.
Perforated board with cut-outs for stationary use of the edge bander in the MFT multifunction table in combination with the AP-KA 65 adapter plate. For small batches, straight edges, freeform elements and gluing inclined edges, angle of 0–47°. Guide plates for guiding the workpiece safely, easy to attach via integral M4 reducing rings.
- Perfectly prepared cut-out for the AP-KA 65 adapter plate
- Sliding strip can be used flexibly due to M4 threaded sockets
- Especially steady thanks to the use of a three-layer MDF panel
- Can be easily replaced by the standard perforated board when MFT is present
- allows the user to swivel the machine (0 – 47°) in the bench in combination with the AP-KA 65 adapter plate and therefore position the workpiece horizontally during edging – for convenient and safe guidance, even with larger objects
Utilisation
Main applications
- With cut-outs for stationary use of the edge bander in the MFT multifunction table in combination with the adapter plate AP-KA 65
- For small batches, straight edges, free form elements and gluing inclined edges, angle from 0-47°
- Guide plates for guiding the workpiece safely, easy to attach via integral M4 reducing rings
Technical data
Technical data
Dimensions length x width
1 102 x 718 mm
This might also interest you
There is more to discover
AP-KA 65
Adapter plate
KP 65/2
Trimming machine
KSP-KA 65
Magazine for holding edging
ZR-KA 65
Additional roll
ZK HW 45/45
Scraper
LAS-STF-KA 65
Scratch protector
EF-LAS-STF-KA 65 10x
Spare felt
PF-STF 80x133 STF H/5
Polishing felt
GP-MFT/3 KA65 15x
Crossheaded guide
KA 65-Plus
Edge bander CONTURO