The MB 40 mobile drilling attachment is your companion when precision is required. As a compact drilling aid, it enables you to drill at right angles with pinpoint accuracy and repeat accuracy, no matter where you are working. Versatile stops and exact depth adjustment allow you to drill vertical holes, end face holes and a series of holes. For a good view of the drilling point, you can couple the dust extraction directly with the base plate. As a further FastFix attachment, it is ideally suited to your drilling applications in wood, metal and plastic, thus expanding the range of possible uses for your Festool cordless drills.
Main applications
Technical data
Do you want holes drilled at right angles with pinpoint accuracy and repeat accuracy? The MB 40 mobile drilling attachment is made for exactly this: Solid and stable construction, with depth adjustment via a scale and a variety of stops and adapters.
The mobile drilling attachment comes to the workpiece and not the other way round. It is handy and compact, so you can easily take it with you wherever you go.
The FastFix attachment, which you can customise to your individual needs: It can be quickly converted for drilling holes in workpiece edges and, here as well, it guarantees you the precision that you need.
Enables you to fit Festool cordless drills and cordless percussion drills quickly, easily and entirely without tools.
For depth-limited holes up to 50 mm, such as series of holes or cupboard hinges, the exact plunge depth into the material can be set in mm or inches using the scale.
For holes in the 32 mm system with a 3 mm hole series pin and a 5 mm hole series pin. The pin stays in the same spot throughout the hole series project. No need to switch the pin.
For fast and precise drilling with repeat accuracy, parallel to an edge.
Enables precise drilling in panel edges.
For fast drilling in a line. The adapter can be attached to all Festool guide rails without tools.
Enable easy guidance when drilling. For special applications, you can convert the drilling attachment and remove the spring.
Thanks to the holes in the base plate, you can fit the MB 40 on a workpiece or on individually built fixtures.
Help when drilling series of holes, cupboard hinges and alignment on the scribe mark, to achieve drilled holes with pinpoint accuracy.
For a clear view of the drilling point and a clean working environment, a mobile dust extractor from dust class M can be connected to the extractor connector.
There is more to discover
You may not have all functions available. We recommend that you download a new browser version.
