Purchase online

    Select an online shop and you will be redirected

    Postcode
    Alphabetical order
    {{'Available in {0} online shop'.format(ctrl.counter)}} {{'Available in {0} online shops'.format(ctrl.counter)}}

    Cordless percussion drill QUADRIVE PDC 18/4 5,2/4,0 I-Set-SCA

    Item number 576468

    Items included and different models

    • This machine

      Cordless percussion drill PDC 18/4 5,2/4,0 I-Set-SCA
      Items included

      BP 18 Li 4.0 HPC-ASI battery pack 1x 

      BP 18 Li 5.2 AS battery pack 1x 

      rapid charger TCL 6 1x 

      SCA 8 rapid charger 1x 

      additional side-mounted hand grip 1x 

      angle chuck 1x 

      bit PZ 2 1x 

      CENTROTEC bit holder BH 60 CE Imp 1x 

      CENTROTEC tool chuck 1x 

      depth stop 1x 

      FastFix keyless chuck 13 mm 1x 

      Qty. in pack

      1.00 Pieces

      Packaging

      in Systainer SYS3 M 187

       
    • Comparable product

      Items included

      BP 18 Li 4.0 HPC-ASI battery pack 1x 

      BP 18 Li 5.2 AS battery pack 1x 

      rapid charger TCL 6 1x 

      SCA 8 rapid charger 1x 

      additional side-mounted hand grip 1x 

      angle chuck 1x 

      bit PZ 2 1x 

      CENTROTEC bit holder BH 60 CE Imp 1x 

      CENTROTEC tool chuck 1x 

      depth stop 1x 

      FastFix keyless chuck 13 mm 1x 

      Qty. in pack

      1.00 Pieces

      Packaging

      in Systainer SYS3 M 187

    • Comparable product

      Items included

      BP 18 Li 4.0 HPC-ASI battery pack 1x 

      BP 18 Li 5.2 AS battery pack 1x 

      rapid charger TCL 6 1x 

      SCA 8 rapid charger 1x 

      additional side-mounted hand grip 1x 

      angle chuck 1x 

      bit PZ 2 1x 

      CENTROTEC bit holder BH 60 CE Imp 1x 

      CENTROTEC tool chuck 1x 

      depth stop 1x 

      FastFix keyless chuck 13 mm 1x 

      Qty. in pack

      1.00 Pieces

      Packaging

      in Systainer SYS3 M 187

    • Comparable product

      Items included

      BP 18 Li 4.0 HPC-ASI battery pack 1x 

      BP 18 Li 5.2 AS battery pack 1x 

      rapid charger TCL 6 1x 

      SCA 8 rapid charger 1x 

      additional side-mounted hand grip 1x 

      angle chuck 1x 

      bit PZ 2 1x 

      CENTROTEC bit holder BH 60 CE Imp 1x 

      CENTROTEC tool chuck 1x 

      depth stop 1x 

      FastFix keyless chuck 13 mm 1x 

      Qty. in pack

      1.00 Pieces

      Packaging

      in Systainer SYS3 M 187

    • Comparable product

      Items included

      BP 18 Li 4.0 HPC-ASI battery pack 1x 

      BP 18 Li 5.2 AS battery pack 1x 

      rapid charger TCL 6 1x 

      SCA 8 rapid charger 1x 

      additional side-mounted hand grip 1x 

      angle chuck 1x 

      bit PZ 2 1x 

      CENTROTEC bit holder BH 60 CE Imp 1x 

      CENTROTEC tool chuck 1x 

      depth stop 1x 

      FastFix keyless chuck 13 mm 1x 

      Qty. in pack

      1.00 Pieces

      Packaging

      in Systainer SYS3 M 187

    Functions

    Outstanding performance. Powerful. Resilient. With hammer mechanism.

    For drilling and screwdriving with large diameters, the QUADRIVE PDC 18 cordless percussion drill delivers high power and speeds with its robust four-gear metal gearbox. Powerful screwdriving with a torque of 60 Nm in first gear and precise drilling with 3,800 rpm in fourth gear are no longer a problem. Whether working with wood or metal or even in brickwork with the axial impact activated – the PDC 18 is extremely tough and its maintenance-free brushless EC-TEC motor ensures excellent durability.

    • Powerful for work with screws and drills with larger diameters
    • Maximum power: Thanks to the extremely powerful, brushless, and therefore long-lasting, EC-TEC motor
    • Robust: Resilient four-speed metal gearbox, also fully covered by the comprehensive support provided by Festool Service
    • For an even wider range of applications: Axial impact function that can be activated for drilling into masonry
    • With four gears for every working situation: From screwdriving with 60 Nm torque in first gear to precise drilling at 3800 rpm in fourth gear
    • Versatile: Quick conversion without the need for tools thanks to the FastFix interface for drilling, screwdriving, angular drilling and angular screwdriving
    • Flexible battery system: The 4.0 Ah Li-HighPower Compact battery pack provides the ideal combination of power, compactness and lightness for applications with high power demands. The 5.2 Ah battery pack is the right choice for even more power for particularly difficult drilling and screwdriving applications. Fully covered: Needless to say, the comprehensive support provided by Festool Service also applies to battery packs
    • Convenient: The work area is optimally lit by LED lighting that can be switched on
    • Mobile: Packaged in Systainer³ products, the QUADRIVE can also be seamlessly integrated into bott vehicle equipment for easy transportation from the workshop to the construction site. Systainer³ products are compatible with one another and can be connected to all previous Systainer generations, mobile dust extractors and many other system accessories, such as roll boards or the mobile workshop

    Product highlights

    • Robust powerhouse.

      The resilient four-gear metal gearbox can handle even the greatest of loads, while delivering impressive power and speeds. With 60 Nm in the first gear, the QUADRIVE PDC 18 can even handle 10 × 300 mm screws effortlessly. With axial impact that can be activated for powerful drilling in brickwork.

    • Long-lasting and powerful.

      Extremely durable, free of wear and requires no maintenance: the brushless EC-TEC motor is the epitome of long lasting performance. For even longer lasting performance per battery charge, the maintenance free brushless EC-TEC motor only takes the exact amount of power that the application demands.

    • Versatile and flexible.

      To cater for a wide range of application options, the smart FastFix interface enables the attachments to be changed quickly and without the need for tools. For flexible drilling and screwdriving, including angular drilling and angular screwdriving.

    Product details

    PDC 18/4 5,2/4,0 I-Set-SCA
    • Robust metal gearbox

      Withstands the enormous forces and speeds of the brushless Festool EC-TEC motor, even for long periods.

    • An even wider range of applications

      Drilling into masonry and stone up to 10 mm is no problem thanks to the axial impact feature that can be switched on.

    • Intelligent motor management

      The brushless EC-TEC motor is wear-free and converts the energy from the battery into optimum power with virtually no losses. The electronic motor management also guarantees maximum service life: Microprocessors monitor and control the temperature, voltage and current consumption of the motor, electronics and battery.

    • Durable and extremely light

      The Li-HighPower Compact battery guarantees full power, while weighing considerably less. To provide even more endurance, the brushless and maintenance-free EC-TEC motor only takes as much power as required by each screwing task. The 5.2 Ah battery pack is the right choice for even more power for particularly difficult drilling and screwdriving applications.

    • Can be individually adjusted

      You can perfectly adjust both the torque (in 12 stages) and the speed to your job requirement. If the preset value is exceeded, the electronics switches the device off.

    • Optimal lighting

      The LED light can be switched on, enabling precise work to be carried even in dark corners.

    • In the smallest of spaces

      The angle attachment is perfect for work around corners and reaching concealed screws at tight angles.

    • CENTROTEC quick-change system

      Fast change between drilling, countersinking and screwdriving: The CENTROTEC quick-change system is a chuck and bit holder in one and, at the same time, 50% smaller and 80% lighter than a standard drill chuck. The hexagonal tools are centred using balls – for optimised power transmission and ten times higher true running.

    • Chuck for standard tools

      The chuck with a standard width of up to 13 mm also enables the use of all standard bits and drill bits. Tool-free mounting via the FastFix interface.

    • Extra mobile with vehicle integration

      The screwdriver for Systainer³ products can also be seamlessly integrated into bott vehicle equipment for easy transportation from the workshop to the construction site. Systainer³ products are compatible with one another and can be connected to all previous Systainer generations, mobile dust extractors and many other system accessories, such as roll boards or the mobile workshop.

    • Robust metal gearbox

      Withstands the enormous forces and speeds of the brushless Festool EC-TEC motor, even for long periods.

    • An even wider range of applications

      Drilling into masonry and stone up to 10 mm is no problem thanks to the axial impact feature that can be switched on.

    • Intelligent motor management

      The brushless EC-TEC motor is wear-free and converts the energy from the battery into optimum power with virtually no losses. The electronic motor management also guarantees maximum service life: Microprocessors monitor and control the temperature, voltage and current consumption of the motor, electronics and battery.

    • Durable and extremely light

      The Li-HighPower Compact battery guarantees full power, while weighing considerably less. To provide even more endurance, the brushless and maintenance-free EC-TEC motor only takes as much power as required by each screwing task. The 5.2 Ah battery pack is the right choice for even more power for particularly difficult drilling and screwdriving applications.

    • Can be individually adjusted

      You can perfectly adjust both the torque (in 12 stages) and the speed to your job requirement. If the preset value is exceeded, the electronics switches the device off.

    • Optimal lighting

      The LED light can be switched on, enabling precise work to be carried even in dark corners.

    • In the smallest of spaces

      The angle attachment is perfect for work around corners and reaching concealed screws at tight angles.

    • CENTROTEC quick-change system

      Fast change between drilling, countersinking and screwdriving: The CENTROTEC quick-change system is a chuck and bit holder in one and, at the same time, 50% smaller and 80% lighter than a standard drill chuck. The hexagonal tools are centred using balls – for optimised power transmission and ten times higher true running.

    • Chuck for standard tools

      The chuck with a standard width of up to 13 mm also enables the use of all standard bits and drill bits. Tool-free mounting via the FastFix interface.

    • Extra mobile with vehicle integration

      The screwdriver for Systainer³ products can also be seamlessly integrated into bott vehicle equipment for easy transportation from the workshop to the construction site. Systainer³ products are compatible with one another and can be connected to all previous Systainer generations, mobile dust extractors and many other system accessories, such as roll boards or the mobile workshop.

    Usage

    Main applications

    • Production of wooden substructures, frame structures
    • Installation of doors and windows
    • Drilling and screwdriving in wood, metal and plastic
    • Drive screws into wood up to 10x300 mm
    • Drilling in wood up to 50 mm with Forstner drill bits

    Technical Data

    
    Technical data
    Battery voltage
    18 V
    Gears
    4
    Idling speed, 1st gear/2nd gear
    0 - 400/0 - 850 min⁻¹
    Idling speed, 3rd/4th gear
    0 - 1850/0 - 3800 min⁻¹
    Max. number of strokes
    76000.00 min⁻¹
    Drilling diameter, wood/steel
    50/13 mm
    Drilling diameter in brickwork
    10.00 mm
    Torque adjustment 1st/2nd gear
    1.2 - 11.5/0.8 - 7.2 Nm
    Max. torque, wood/steel
    40/60 Nm
    Chuck range
    1.5 - 13 mm
    Li-Ion battery capacity
    4,0/5,2 Ah
    Weight with Li-Ion battery
    1,9/2,0 kg
    Drive type
    Battery
    Performance features
    • Electronic

      Speed control for adjusting to all types of materials.

    • FastFix

      Makes changing routing, sawing, planing, sanding, drilling and screwdriving tools easier.

    • Torque shut-off

      Intelligent technology ensures the optimum screwdriving force for every material.

    • Lithium-ion battery

      Fitted with high-performance lithium ion battery pack.

    • EC-TEC motor

      The EC-TEC drive concept generates an extraordinary amount of power while consuming extremely low amounts of energy.

    • AIRSTREAM

      Faster reuse of battery packs thanks to AIRSTREAM technology (cooling function for faster availability) and significantly increased charging capacity

    Noise and vibration values
    Impact drilling in concrete: Total vibration average, Ah
    18.00 m/s²
    Impact drilling in concrete: Uncertainty (noise) K
    3.00 dB
    Impact drilling in concrete: Uncertainty (vibration) K
    1.50 m/s²
    Impact drilling in concrete: A-weighted sound pressure level, LpA
    95.00 dB(A)
    Impact drilling in concrete: A-weighted sound power level, LWA
    106.00 dB(A)
    Drilling in metal: Total vibration average, Ah
    3.00 m/s²
    Drilling in metal: Uncertainty (noise) K
    5.00 dB
    Drilling in metal: Uncertainty (vibration) K
    1.50 m/s²
    Drilling in metal: A-weighted sound pressure level, LpA
    63.00 dB(A)
    Drilling in metal: A-weighted sound power level, LWA
    74.00 dB(A)
    Fastening: Total vibration average, Ah
    3.00 m/s²
    Fastening: Uncertainty (noise) K
    3.00 dB
    Fastening: Uncertainty (vibration) K
    1.50 m/s²
    Fastening: A-weighted sound pressure level, LpA
    60.00 dB(A)
    Fastening: A-weighted sound power level, LWA
    71.00 dB(A)

    Downloads

    Accessories