- Please select -
Purchase online

Select an online shop and you will be redirected

Alphabetical order
{{'Available in {0} online shop'.format(ctrl.counter)}} {{'Available in {0} online shops'.format(ctrl.counter)}}
Item number 574364

Module edge router MFK 700 EQ-Set

MFK 700 EQ-Plus MFK 700 EQ-Set MFK 700 EQ/B-Plus

Set versions

Items included

  • Ø 8 mm clamping collet
  • parallel side fence with fine adjustment and extraction hood
  • 1.5° router table
  • extraction hood
  • open ended spanner, WAF 19

Items included MFK 700 EQ-Set

  • Ø 8 mm clamping collet
  • parallel side fence with fine adjustment and extraction hood
  • 1.5° router table
  • extraction hood
  • open ended spanner, WAF 19

Versatile when trimming edges.

Convenient conversion. The modular design makes the MFK 700 a cost-effective all-rounder: Only the router table, and not the entire router, needs to be changed – and it is ideally equipped for all tasks involved in corner and edge trimming. Simply set down the right table and you can immediately route veneers or grooves, round edges, create profiles and much more.

  • Wider application spectrum due to interchangeable router tables
  • Efficient dust extraction integrated directly on the router base
  • 130 mm table support surface for accurate routing results
  • Electronic speed adjustment switch for perfect adaptation to the working material
  • Motor temperature monitor for a long service life

Product highlights

  • Achieve ideal results more quickly:

    The universal interface enables various router table modules to be used for a range of different applications.

  • Convenient and safe:

    The long router table support with auxiliary handle guarantees safe guidance – without tipping over.

  • Systems get it done:

    Can be expanded in a number of ways with perfectly matched routers, router tables, collets, parallel side fence and more.

Product details

  • Precise fine adjustment

    The routing height can be adjusted accurately to a tenth of a millimetre. The lock prevents the router table from moving during operation and is easy to operate.

  • Universal interface

    By using the integrated interface, different router table modules can be used without the need for tools.

  • Moving contact pad

    The MFK 700 has an attachable base feeler bearing, ensuring results that are free from marks.

  • Surface protection

    The bench of the MFK 700 is inclined by 1.5° to protect the surface from damage. The slight inclination of the cutter prevents the surface from being milled off.

  • Flush trimming

    A 0° bench is also available, e.g. for flush trimming veneered or coated workpiece edges.

  • Flush routing and rounding

    The design of the router table on the MFK 700 incorporates an opening on the support base to accommodate the veneer overhang. Veneer or strips can be routed flush and rounded at the same time using the correct Festool cutter.

  • Side stop with fine setting

    The moveable stop jaws of the parallel side fence are installed optimally on the router and thus prevent it from tipping over. This makes perfect rebates and grooves very easy.

  • Cutter replacement in seconds

    With the MFK 700, cutter replacement is quick and easy. Actuate the spindle stop via the rocker.

  • Clean and healthy work

    The extractor connector is integrated directly in the router table – for optimum handling and a clear view of the workpiece.

  • Flexible motor design

    The right motor arrangement for every application: The motor can be installed horizontally or vertically on the router table.

  • Speed control adapted to the material

    Because of the MMC electronics, the speed of the MFK 700 can be quickly adapted to the working material and is kept constant under load. The temperature monitoring of the motor also guarantees a long service life.

  • For quick device changeover

    Thanks to the plug-it system, the device can be changed quickly – directly via the cable and not via the socket or extractor: One cable for all devices. And even if the cable breaks, it can be replaced quickly without any problems.

Main applications

  • Routing solid wood, acrylic and PVC edge veneer
  • Chamfering, rounding and profiling edges
  • Grooving with side stop

Performance features

  • Plug it

    Removable, replaceable mains cable with safety lock for quick conversion.

  • MMC Multi Material Control electronics

    “Multi Material Control” power electronics with constant adjustable speed and temperature monitor for work on all types of material.


    Standard connection (27/36/50 mm) for dust extraction, protects the operator and the environment.

  • Antistatic function

    Mobile dust extractors and tools with the antistatic function to prevent static charge from accumulating when working.

  • FastFix

    Makes changing routing, sawing, planing, sanding, drilling and screwdriving tools easier.

Technical data

Collet dia.
6 - 8 mm
Routing depth fine adjustment range
14.00 mm
Idle engine speed
10 000 - 26 000 min⁻¹
Power consumption
720 W
1.90 kg
Max. cutter diameter
32.00 mm
Dust extraction connection dia.
27 mm

Noise and vibration values

Routing: Total vibration average, Ah
3.00 m/s²
Routing: A-weighted sound power level, LWA
89.00 dB(A)
Routing: Uncertainty (noise) K
3.00 dB
Routing: Uncertainty (vibration) K
2.00 m/s²
Routing: A-weighted sound pressure level, LpA
78.00 dB(A)

Items included MFK 700 EQ-Set


Module edge router

  • Accessories

    SZ-D 8/OF 1000

  • Accessories
    Parallel side fence

    SA-MFK 700

  • Accessories
    Router table

    FT-MFK 700 1,5° Set

Brochures and operating instructions


  • Router table FT 0°

    Item number: 491427

  • Router table FT-MFK 700 1,5° Set

    for MFK/OFK 700

    Item number: 495165

  • Parallel side fence SA-MFK 700

    for MFK 700

    Item number: 495182

Additional versions

  • Routing
    Edge router OFK 700

    OFK 700 EQ-Plus
  • Routing
    Module edge router MFK 700

    MFK 700 EQ-Plus MFK 700 EQ-Set MFK 700 EQ/B-Plus