MFK 700 EQ-Set

The routing height can be adjusted accurately to a tenth of a millimetre. The lock prevents the router table from moving during operation and is easy to operate.

By using the integrated interface, different router table modules can be used without the need for tools.

The MFK 700 has a moving contact pad with an external ball bearing, ensuring streak-free routing results (included in the scope of delivery of the Set versions or available separately).

The bench of the MFK 700 is inclined by 1.5° to protect the surface from damage. The slight inclination of the router tool prevents you from routing into the material surface (included in the scope of delivery for the Set versions or available separately).

The design of the router table on the MFK 700 incorporates an opening on the support base to accommodate the veneer overhang. Veneer or strips can be routed flush and rounded at the same time using the correct Festool cutter.

Thanks to the central clamp and the tool-free adjustable guidance jaws, the parallel side fence is ready for use in an instant. The fine adjuster, precise to the millimetre, offers maximum precision when routing.

With the MFK 700, cutter replacement is quick and easy. Actuate the spindle stop via the rocker.

The extractor connector is integrated directly in the router table – for optimum handling and a clear view of the workpiece.

The right motor arrangement for every application: The motor can be installed horizontally or vertically on the router table.

Because of the MMC electronics, the speed of the MFK 700 can be quickly adapted to the working material and is kept constant under load. The temperature monitoring of the motor also guarantees a long service life.

Thanks to the plug-it system, the device can be changed quickly – directly via the cable and not via the socket or extractor: One cable for all devices. And even if the cable breaks, it can be replaced quickly without any problems.