Festool Module edge router MFK 700 EQ-Plus online

Illustrations are examples. Please note the variant and scope of delivery.

Select set

Do you need support?

All sets at a glance

Contains

4 Article

Product details

Highlights

The perfect tool for your trade

More precision.

The long router table support with a handle in the perfect balancing position lets you guide it safely – without it tipping over. The depth adjustment, accurate to a tenth of a millimetre, guarantees spot-on routing results.

More ways to use it.

Thanks to the universal interface, you can use different router tables depending on what you need: for rounding off, chamfering, profiling, rebating, grooving and flush routing.

More cleanliness.

An integrated extraction channel in the wide support table whisks the chips away upwards. That gives you top-notch extraction results and fresher air.

Spot on depth adjustment

The routing depth can be fine-tuned to a tenth of a millimetre. The user-friendly clamp handle stops the router table from shifting while you're working.

Flexibility for working at heights

Different router tables (accessories) and adaptable guide systems can be set up vertically using a universal interface.

Horizontal and vertical connectors

You can mount different router tables with a 0° or 1.5° tilt (accessories) either horizontally or vertically, along with all sorts of guiding systems through the integrated interface. This lets you round off, chamfer, profile, and groove. You can also work on overhanging laminate boards and edge bandings.

Cutter replacement in seconds

The router can be changed quickly and easily thanks to the spindle stop.

Clean and healthy work

An integrated extraction channel in the wide support table whisks the chips away efficiently and makes handling a breeze.

Speed control adapted to the material

With the MMC electronics, you can quickly tweak the speed to match the material you're working with, and it stays steady when under load. Plus, the motor's temperature monitoring helps ensure it lasts a good long while.

For quick device changeover

Thanks to the plug-it system, the device can be changed quickly – directly via the cable and not via the socket or extractor: One cable for all devices. And even if the cable breaks, it can be replaced quickly without any problems.

Slidey contact pad (Accessories)

Can be attached to the MFK 700. Lets you fully utilise the router blade. The contact pad is used for edge veneering with a horizontally mounted router table (at a 0° or 1.5° angle).

Flush trimming of curved bits (Accessories)

The design of the router table lets you perfectly trim solid wood edging along curved and round bits with an overhang of up to 15 mm. Just what you need for bistro tables, for instance.

Parallel side fence with fine tuning (accessories)

With the central clamp and tool-free adjustable guide jaws, the Parallel side fence is ready to go in no time. The fine adjuster, precise to the millimetre, gives you top-notch accuracy when you're grooving or rebating.

One-of-a-kind guiding system (Accessories)

The touch probe smooths out any lumps, so mistakes don’t get passed on to the cutter and end up on the edge of the workpiece. When you’re dealing with closed surfaces, you can swap out the touch probe for a follower roller.

Jump below the recommendations

This might also interest you

There is more to discover

OFKC 500 R3 EB-Basic

Cordless edge router

MFKC 700 EB-Basic

Cordless module edge router

MFKC 700 KA EB-Basic

Cordless module edge router

CTM 26 EI

Mobile dust extractor CLEANTEC

CTM 26 EI-FLR

Mobile dust extractor CLEANTEC

Jump above the recommendations