OFK 500 Q-Plus R3

The flush ball bearing mount on the cutter keeps the height down to just 12 mm and makes it easy to route in rebates or from a stack of panels.

The routing depth can be adjusted accurately to 1/10 mm. The lock prevents the router table from moving during operation and is easy to operate.

The router can be changed quickly and easily thanks to the spindle stop.

The clear dust extraction attachment makes sure that routing shavings are sucked up properly. The spring-loaded ball bearing brake stops scorch marks from appearing on the surface.

Thanks to the plug-it system, the device can be changed quickly – directly via the cable and not via the socket or extractor: One cable for all devices. And even if the cable breaks, it can be replaced quickly without any problems.

Weighing just 1.4 kg and with an ideal centre of gravity, the OFK 500 is handy and perfect for either vertical or horizontal use.

With the OFK 500 series, the cutter is mounted straight onto the spindle. That ensures top-notch run-out accuracy and the best quality work.

The hard-wearing base runner stops nasty scratches or dents on the workpiece and gives you smooth sliding on any surface.

Smaller hole diameter in the base plate and matching cutters for perfect milling results without tipping.

Cheers to the spring plate on the ball bearing brake, you’ve got more space to move when working without dust extraction.