Purchase online

    Select an online shop and you will be redirected

    Postcode
    Alphabetical order
    {{'Available in {0} online shop'.format(ctrl.counter)}} {{'Available in {0} online shops'.format(ctrl.counter)}}

    {{shop.shopData.name}}
    {{shop.shopData.zip}} {{shop.shopData.city}}

    {{shop.shopData.text}}

    To the online shop

    Long-reach sander PLANEX LHS 225-SW/CTM 36-Set

    Item number 575456
    Select variant
    To the variant comparison

    Items included and different models

    • This machine

      Long-reach sander LHS 225-SW/CTM 36-Set
      Items included

      AD-ST DUO 200 adapter 1x 

      CTM 36 E AC-LHS mobile dust extractor 1x 

      hook-and-loop fastener KV-215 (pack of 5) 1x 

      LHS 225 EQ-Plus/IP long-reach sander 1x 

      mobile dust extractor CTM 36E AC PLANEX 1x 

      PLANEX tool holder 1x 

      ST DUO 200 tripod 1x 

      StickFix 215 mm diameter sanding pad including 2 interface pads 1x 

      StickFix sanding pad dia. 215 mm (extra soft) 1x 

      SYS tool box 1x 

      Qty. in pack

      1.00 Pieces

      Packaging

      in carton

       

    • Comparable product

      Long-reach sander LHS 225-IP/CTM 36-Set
      Items included

      AD-ST DUO 200 adapter 1x 

      CTM 36 E AC-LHS mobile dust extractor 1x 

      hook-and-loop fastener KV-215 (pack of 5) 1x 

      LHS 225 EQ-Plus/IP long-reach sander 1x 

      mobile dust extractor CTM 36E AC PLANEX 1x 

      PLANEX tool holder 1x 

      ST DUO 200 tripod 1x 

      StickFix 215 mm diameter sanding pad including 2 interface pads 1x 

      StickFix sanding pad dia. 215 mm (extra soft) 1x 

      SYS tool box 1x 

      Qty. in pack

      1.00 Pieces

      Packaging

      in carton

      Show details

    • Comparable product

      Long-reach sander LHS 225/CTM 36/STL 450-Set
      Items included

      AD-ST DUO 200 adapter 1x 

      CTM 36 E AC-LHS mobile dust extractor 1x 

      hook-and-loop fastener KV-215 (pack of 5) 1x 

      LHS 225 EQ-Plus/IP long-reach sander 1x 

      mobile dust extractor CTM 36E AC PLANEX 1x 

      PLANEX tool holder 1x 

      ST DUO 200 tripod 1x 

      StickFix 215 mm diameter sanding pad including 2 interface pads 1x 

      StickFix sanding pad dia. 215 mm (extra soft) 1x 

      SYS tool box 1x 

      Qty. in pack

      1.00 Pieces

      Packaging

      in carton

      Show details
    Show details
    close

    Functions

    Efficient short-reach or long-reach sanding on walls and ceilings.

    PLANEX LHS 225. Click, clack: Being efficient and variable can be this convenient. With an easily adjustable working length that turns the PLANEX into a short-reach sander, long-reach sander or, if required, an extra-long-reach sander. With up to 30 kg material removal capacity per hour and – combined with the GRANAT abrasive – the use of abrasives is noticeably reduced at the same time. And, in conjunction with the CLEANTEC AC-PLANEX mobile dust extractor, which has been specially adapted for it, it guarantees even more speed in dry mortarless construction.

    • Two lengths, one machine - extend or reduce in a few simple hand movements
    • Two-speed gears for efficient, rapid material removal on walls and ceilings
    • Perfectly balanced for easy handling
    • Robust, reliable drive components and efficient power transfer
    • Adjustable suction power decreases the perceived weight of the machine
    • Detachable brush segment allows sanding up to the edge
    • approved for dust class M

    Product highlights

    • Achieve ideal results more quickly:

      Powerful and fast material removal thanks to robust, two-speed transmission with direct power transmission.

    • Convenient and safe:

      Easy length adjustment and optional carrying harness to prevent back strain.

    • Innovative down to the finest detail:

      With dust extraction that can be regulated, the PLANEX supports its own weight and can be guided easily.

    Product details

    LHS 225-SW/CTM 36-Set

    • A secure connection in seconds

      Comfortable work with variable length – the simple quick-clamp system made from robust steel is designed for working on walls and high ceilings.

    • Removable brush segment

      You can easily and quickly detach the sanding pad from the front part and then work right up to the edge.

    • Variable dust extraction

      The dust extraction system can be set to internal or external extraction. The internal extraction leads to suction support for the PLANEX on sub-surfaces, which makes your work easier.

    • Sophisticated ergonomics

      Handles which fit comfortably in your hand ensure effortless work. The soft-grip surface improves grip significantly.

    • Long service life

      The Festool drive system with two-speed metal gearbox ensures an optimum transfer of force to the sanding pad. The result is an extremely high material removal capacity and a long service life.

    • Robust sanding pad

      High-strength MPE plastic and a heat-resistant burr layer make the sanding pad particularly hard-wearing. The white edge has no burr to enable quick pad changes.

    • Large cutting angle adjustment

      Its flexible joint provides you with a lot of room for movement. And the sanding pad lies completely flat and sands with maximum efficiency.

    • Working with the material in mind

      The MMC electronics always maintain a constant speed. And the freely mounted, dust-protected on/off switch is guaranteed to function reliably in heavy-duty applications.

    • A firm hold

      The mechanical lock for 36 mm hoses prevents the hose from slipping out of the extractor connector during swivel movements.

    • The right sanding pad for your application

      The standard sanding pad is recommended for even sub-surfaces and if a higher material removal rate is required. The IP sanding pad is mainly suitable for sensitive or uneven sub-surfaces, or if a lower material removal rate is required or wanted. It is important to note that when using the IP sanding pad, the associated interface pad must also be used, whereby the suction support is reduced when compared with the standard sanding pad.

    • A secure connection in seconds

      Comfortable work with variable length – the simple quick-clamp system made from robust steel is designed for working on walls and high ceilings.

    • Removable brush segment

      You can easily and quickly detach the sanding pad from the front part and then work right up to the edge.

    • Variable dust extraction

      The dust extraction system can be set to internal or external extraction. The internal extraction leads to suction support for the PLANEX on sub-surfaces, which makes your work easier.

    • Sophisticated ergonomics

      Handles which fit comfortably in your hand ensure effortless work. The soft-grip surface improves grip significantly.

    • Long service life

      The Festool drive system with two-speed metal gearbox ensures an optimum transfer of force to the sanding pad. The result is an extremely high material removal capacity and a long service life.

    • Robust sanding pad

      High-strength MPE plastic and a heat-resistant burr layer make the sanding pad particularly hard-wearing. The white edge has no burr to enable quick pad changes.

    • Large cutting angle adjustment

      Its flexible joint provides you with a lot of room for movement. And the sanding pad lies completely flat and sands with maximum efficiency.

    • Working with the material in mind

      The MMC electronics always maintain a constant speed. And the freely mounted, dust-protected on/off switch is guaranteed to function reliably in heavy-duty applications.

    • A firm hold

      The mechanical lock for 36 mm hoses prevents the hose from slipping out of the extractor connector during swivel movements.

    • The right sanding pad for your application

      The standard sanding pad is recommended for even sub-surfaces and if a higher material removal rate is required. The IP sanding pad is mainly suitable for sensitive or uneven sub-surfaces, or if a lower material removal rate is required or wanted. It is important to note that when using the IP sanding pad, the associated interface pad must also be used, whereby the suction support is reduced when compared with the standard sanding pad.

    Usage

    Main applications

    • Sanding plasterboard and dry wall filler
    • Removing wallpaper residues

    Technical Data

    
    Technical data
    Power consumption
    550 W
    Rotational speed
    340 - 910 min⁻¹
    Sanding pad dia.
    215.00 mm
    Weight (length 1.60 m)
    4.60 kg
    Weight (length 1.10 m)
    3.80 kg
    Drive type
    Mains
    Dust extraction connection dia.
    36 mm
    Performance features

    • MPE sanding pad

      Sanding pads and sanding discs made from extremely durable materials for long service life.

    • Plug it

      Removable, replaceable mains cable with safety lock for quick conversion.

    • MMC Multi Material Control electronics

      “Multi Material Control” power electronics with constant adjustable speed and temperature monitor for work on all types of material.

    • Antistatic function

      Mobile dust extractors and tools with the antistatic function to prevent static charge from accumulating when working.

    • StickFix STF

      Quick, economical fastening system for abrasives – no adhesives, no clamping.

    Downloads

    Accessories

    You can view 8 of 11 possible accessory items here. You can view 4 of 11 possible accessory items here.

    Show all
    Show all

    Additional versions

    You might be also interested in this