TS 75 EBQ-Plus

With a cutting depth of 75 mm and a power of 1600 watts, even thick workpieces can be sawed with a single cut. The time-consuming task of machining two sides is a thing of the past. This minimises reworking and saves the laborious process of rotating the workpiece.

For high-quality working results: The guide rail guarantees clean, splinter-free cuts. The TS 75 is fitted with guide jaws that do not require tools to be adjusted, in order to enable the saw to operate without any inaccuracy.

The KickbackStop prevents kickbacks when inserting the saw. Always to hand in the practical holder, it guarantees safe work.

Work adapted to the material. The FastFix spindle stop makes it extremely easy to change the saw blade. This way, you are always working with the right saw blade and sawing at a speed adapted to the material.

The triple bearing of the motor improves the running smoothness and extends the service life.

You can set the cutting depth accurate to the millimetre using the latching depth stop.

With the clip-on splinter guard in combination with the guide rail it is even possible to saw on both sides without splinters. Advantage: No rework and considerably less workpiece waste.

Perfect adaptation to the working material, controlled speed and temperature monitoring. The quick-acting brake improves safety by stopping the saw blade in seconds.

The spacer wedge is spring loaded and slides back into the housing automatically when placed on the workpiece. Once the machine is inserted, the spacer wedge moves into the saw groove and prevents the saw blade from getting jammed. This means that the spacer wedge is always on the saw, ensuring safety at all times.

If the saw blade gets jammed, the sliding clutch prevents the saw from jolting back.

The extractor connector, which can be rotated by 360°, makes it exceptionally easy to adjust the dust extractor to suit the working position.

The TS 75 makes precise angle cuts extremely easy. The scribe line corresponds to the cutting edge at all times, even when the saw blade is pivoted. From 0° to 47°, set precisely to the clearly visible scale.